Viewed products
Monitoring for 1 inverter - ideal for...
100400
Monitoring for 1 inverter - ideal for small residential installations. Without the ability to connect sensors, without any output.
0 Item Items
SM2-Basic |Main Unit
Monitoring for 1 inverter - ideal for small residential installations. Without the ability to connect sensors, without any output.
Recipient :
* Required fields
or Cancel
Monitoring for 1 inverter, without sensors, no output.
There is no possibility to add any sensors to this model nor to switch output. It can be connected to the inverter or the electrometer only! Neither it is possible to attach any additional module.
Support for reading electric meters via RS485 bus
We have started supporting Sunways inverters
We support the new Conext ComBox from Schneider Electric
ČESKÝ VÝROBEK (CZECH PRODUCT) label
Choose the power source for your Solar Monitor from the menu next to the picture.
Temperature Range | 0 .. +70 °C |
Dimensions | 72 x 89,7 x 62,2 |
Weight | 0,25 |
Warranty | 5 years |
Mounting | DIN rail or wall mountable |
Screw terminals | 0.5 mm² - 1.5 mm² cable cores |
Protection Degree | IP20 |
LED diodes | Status, RS485 |
Interface | Ethernet (TCP) and up to 3 serial ports |
Power supply | 9-35 V DC, typ. 1.2 W @ 12V |
Number of Supported Devices | 1 |
Extension Modules | ne |
1-Wire Sensors | ne |
Inverter protocols | AEG, Carlo Gavazzi, Danfoss, Delta, Diehl, Fronius, Kaco, Kostal, Mastervolt, Morningstar, Omnik, Omron, Pairan, Power-One, Power-Trap, Refusol, Riello UPS, Santerno, Satcon, ... |
Meter protocols | ABB (REX521), Carlo Gavazzi (VMU-E/X), Fronius (Smart Meter), KMB (SMC-144, PA-144), Phoenix Contact (MA200/250), Schneider-Electric (SEPAM, PM9), Solar Controls (WattRouter), Yorix (GreenBonO), ZPA (IEC 62056-21) |
Interface (LAN) | RJ45 (100BASE-T) -100Mbit/s, compatible with networks 10/100/1000 Mbit/s, auto MDIX |
Protocols (LAN) | HTTP, SOAP, DNS, UDP Setup, Telnet, ARP, ICMP, SMTP, SNMP, Modbus |
Interface | 2x RS485 or 1x RS422 |
Speed | 300 .. 115.200 bps (software configurable) |
Termination | Yes, both for half and full duplex |
Inputs | 3x digital inputs (DI): software configurable between dry contact or S0 pulse meter inputs (e.g. from electrometer), 8-80 V |
Outputs | 1x relay, 32 V, 3 A, protected with power fuse |
RS485 | Protected against transient voltages above 6.8V and against high currents with 10Ω resistors. Additional surge protection can be achieved with SM2-BE (bus extension) module with gas discharge tubes |
No customer comments for the moment.