Viewed products
Monitoring for 1 inverter - ideal for...
100610
Monitoring for 1 inverter - ideal for small residential installations. With ability to connect sensors or some output devices.
0 Item Items
HBUS bus to Solar Monitor unit 488 Kč |
SM2-GPRS |GPRS 85.6 kbps, class 12 3 750 Kč | ||
SM2-IoT |LTE M1 (375 kbps) NB1 (70 kbps) 5 122 Kč | ||
SM2-UMTS |UMTS 5.76 Mbps (7.2 Mbps DL) 4 423 Kč | ||
SM2-GSM |GSM Modem Module 3 000 Kč |
Set of sensors 5 393 Kč | ||
Ambient temperature sensor 610 Kč | ||
PV panel temperature sensor 1 020 Kč | ||
Solar irradiation sensor 3 315 Kč |
PUR cable 28 Kč | ||
Connector M8 - Female 341 Kč | ||
PUR cable with IP68 connector 397 Kč | ||
PUR cable between radiation sensors 678 Kč |
SM3-MU-Start |Main Unit
Monitoring for 1 inverter - ideal for small residential installations. With ability to connect sensors or some output devices.
Recipient :
* Required fields
or Cancel
A full-featured module for PV monitoring, which can also be connected to the inverter or electrometer, sensors, and other output devices! Its functionality can also be extended with expanded modules.
Summary of Hybrid System Monitoring
Support for reading electric meters via RS485 bus
SM2-MU now handles up to 3 pulse meters
We have started supporting Sunways inverters
We support the new Conext ComBox from Schneider Electric
ČESKÝ VÝROBEK (CZECH PRODUCT) label
Get Solar Monitor with reduced-cost set of sensors. Select this option from the menu above next to the picture.
Which option of set of sensors to choose?
Choose the power source for your Solar Monitor from the menu above next to the picture.
Temperature Range | 0 .. +70 °C |
Dimensions | 71,6 x 89,7 x 62,2 |
Weight | 0.25 |
Warranty | 5 years |
Mounting | DIN rail or wall mountable |
Screw terminals | 0.5 mm² - 15 mm² cable cores |
Protection Degree | IP20 |
LED diodes | Status, RS485, Sensors |
Interface | Ethernet (TCP) and up to 3 serial ports |
Power supply | 9-35 V DC, typ. 1,2 W @ 12V |
Number of Supported Devices | 1 |
Extension Modules | SM2-PC, SM2-AD, SM2-DI, SM2-GSM, SM2-GPRS, SM2-UMTS, SM2-NB-IoT, SM2-BE |
1-Wire Sensors | Interface provides 5 V power supply, max. 350 mA, protected with 500 mA power fuse. |
Inverter protocols | AEG, Carlo Gavazzi, Danfoss, Delta, Diehl, Fronius, Kaco, Kostal, Mastervolt, Morningstar, Omnik, Omron, Pairan, Power-One, Power-Trap, Refusol, Riello UPS, Santerno, Satcon, ... |
Meter protocols | ABB (REX521), Carlo Gavazzi (VMU-E/X), Fronius (Smart Meter), KMB (SMC-144, PA-144), Phoenix Contact (MA200/250), Schneider-Electric (SEPAM, PM9), Solar Controls (WattRouter), Yorix (GreenBonO), ZPA (IEC 62056-21) |
Interface (LAN) | RJ45 (100BASE-T) -100Mbit/s, compatible with networks 10/100/1000 Mbit/s, auto MDIX |
Protocols (LAN) | HTTP, SOAP, DNS, UDP Setup, Telnet, ARP, ICMP, SMTP, SNMP, Modbus |
Interface | 2x RS485 or 1x RS422 piggy-back hardware options 2x RS485 or 1x RS422 opto-isolated 1x RS485 + 1x RS232 1x RS485 + 1x RS232 opto-isolated SM2-BE extension module 1x RS232 + 1x RS485 surge protected |
Speed | 300 .. 115.200 bps (software configurable) |
Termination | Yes, both for half and full duplex |
Inputs | 3x digital inputs (DI): software configurable between dry contact or S0 pulse meter inputs (e.g. from electrometer), 8-80 V |
Outputs | 1x relay, 32 V, 3 A, protected with power fuse |
RS485 | Protected against transient voltages above 6.8V and against high currents with 10Ω resistors. Additional surge protection can be achieved with SM2-BE (bus extension) module with gas discharge tubes |
No customer comments for the moment.